Post by chainsaw on Aug 1, 2007 18:03:10 GMT -5
Here is my last project. I have a 1998 Banshee frame, with title. I have removed all extra tabs, and smoothed down a lot of the welds on this frame. I have been working on this frame for the past few years in my free time to eventually build a drag bike with. The frame is straight and is not cracked or broke anywhere. All it needs is a little more prep work before powder or paint. I threw on some primer just to show some of the smooth transitions.
frame - $350 obo
Next up is my fiberglass hood I was going to use on this frame. This hood has a skull molded into the front of it, and aluminum plates to make up the maltese cross around it. There are also spikes on the fender portions, and on the skulls head. Its also got ghost flames on the front and sides. The diamond plate on the side matches up with the custom seat I had made for it as well. You get the entire seat, including pan and foam with latch.. not just a cover. Ive hung onto this hood and seat for a couple of years with plans to use it on my drag bike, but Im getting out of the ATVing sport and selling it all. The diamond plate looks like it doesnt line up with the two, but thats only because I dont have a gas tank on the frame... they will line up once its on your machine. Also, these hoods are made for drag bikes with relocated radiators, not your normal trail or dune shee. There is 0% airflow coming in from the front, and will not work on a normal machine. Besides the pictures below, more of the hood can be seen here www.chainsawgraphics.com/images/index_3.html
Hood and seat combo - $350
Prices are based on you picking them up from me in Hugoton Kansas. Im limited on ways to ship the frame, I think the only place around here that might ship is DHL if they picked it up (not sure if they do that in my area). Shipping costs will be actual cost. Hoods normally cost right at $50 almost anywhere in the upper 48, and the seat is in another box and would be about $30 Id guess. So plan on around $80 for the seat and hood.
please email me for fastest response at midwesttrikers@yahoo.com
frame - $350 obo
Next up is my fiberglass hood I was going to use on this frame. This hood has a skull molded into the front of it, and aluminum plates to make up the maltese cross around it. There are also spikes on the fender portions, and on the skulls head. Its also got ghost flames on the front and sides. The diamond plate on the side matches up with the custom seat I had made for it as well. You get the entire seat, including pan and foam with latch.. not just a cover. Ive hung onto this hood and seat for a couple of years with plans to use it on my drag bike, but Im getting out of the ATVing sport and selling it all. The diamond plate looks like it doesnt line up with the two, but thats only because I dont have a gas tank on the frame... they will line up once its on your machine. Also, these hoods are made for drag bikes with relocated radiators, not your normal trail or dune shee. There is 0% airflow coming in from the front, and will not work on a normal machine. Besides the pictures below, more of the hood can be seen here www.chainsawgraphics.com/images/index_3.html
Hood and seat combo - $350
Prices are based on you picking them up from me in Hugoton Kansas. Im limited on ways to ship the frame, I think the only place around here that might ship is DHL if they picked it up (not sure if they do that in my area). Shipping costs will be actual cost. Hoods normally cost right at $50 almost anywhere in the upper 48, and the seat is in another box and would be about $30 Id guess. So plan on around $80 for the seat and hood.
please email me for fastest response at midwesttrikers@yahoo.com